As Gen Enerji, we are able to test, measure and report in many areas. Some of these titles and their contents are as follows.
GES Field Tests
Protective Earthing and Continuity Tests
Operating Grounding and Voltage Measurements
Voc and Isc Measurements
Polarity Tests
Insulation Tests
Function Tests
Control of All Panels by Thermal Camera
Control of PV Modules by Thermal Camera
I-V Graph Measurements for PV Modules and Arrays
Voc, Isc, Vmpp, Impp, Pmax Measurement results
String performance measure
Module / Array Occupancy Rate
Identification of module / queue defects or shading problems.
Grounding Systems Measurements
Grounding is the transfer of electricity to the ground with a simple system against possible electrical leakages. It is not a matter of preference to make grounding, a measure to protect people and other living things, but a legal obligation. The grounding of the devices used should not be shortened and, more importantly, the grounding must be made in order to protect the living life.
Potential electrical leakages can be prevented from damaging the human health by the grounding method and damage to the devices can be prevented. The regulations must be observed during the report and measurement procedures. As stated in the regulations, the grounding report should be re-prepared at regular intervals of at least 1, maximum 5 years according to the type of structure. The grounding report is the mandatory report of this grounding application by the authorized persons and the report of the company that made the operation.
Basic Ground Resistance Measurements
Soil Specific Resistance Measurements
Machine, Equipment Body Earthing Measurements
Lightning Resistance Grounding Measurements
Generator Grounding Resistance Measurements
Cathodic Protection Tests
Under ground natural gas, fuel and water pipelines, LPG under ground, fuel tanks and metal structures buried underground, internal surfaces of fresh water storage tanks, heat exchanger, thermosiphon, internal surfaces of hot water boilers, in contact with all other fresh water and soil In special structures, in every environment where corrosion may occur, cathodic protection tests are performed according to TS 5141 EN 12954 and TS EN 12473 and other relevant standards